GTCO 2500 Series - Users Guide 1/3 - Manual (Page 21)

2500 Series 21
BANK FIVE
Communications DTE or DCE, handshake and echo.
X-ON/X-OFF Enable or disable output. Tablet begins transmitting at power on (X-
ON) or there is no transmission at power on (X-OFF).
Commands Enable or disable 16-button cursor commands, 2000 style
commands or 9100 style commands.
Beeper Enable or disable beeper command acknowledge.
BANK SIX, SEVEN AND EIGHT
Reset Reset the tablet (software reset).
Lamp Test Light all LED indicators.
Menu Position, erase or restore optional menu.
Restore Factory
Settings Set all parameters to factory defaults.
Baseline Settings Save current parameters as a baseline; restore baseline settings to
active use.
Switch Bank Settings
Bank 1 General Operation
SWITCH 1
0
0
1
1 2
0
1
0
1 SOFT SWITCH EFFECTIVITY
IMMEDIATE
RESET/POWER ON
THIS SESSION ONLY
RESERVED
SWITCH 3
0
1 INDICATOR ASSIGNMENT
TABLET STATUS DISPLAY
USER DEFINED DISPLAY