GTCO 2500 Series - Users Guide 1/3 User Manual
Page 20
2500 Series 20
Switch Controlled Parameters
The following operating characteristics are controlled by the settings of the soft switch
banks. The settings are listed on the page given after the bank number. Parameters which
were too complex to explain with a brief phrase have a thorough explanation on the page
given after this brief explanation.
BANK ONE
Effectivity
Soft switch settings may be made effective immediately, on reset or
for the current session only.
Indicator
Select tablet status or user defined LED indicators.
Operating Mode
Select operating mode.
BANK TWO
Commands
Enable or disable 2000 and 9100 style commands.
Data Rate
Set data rate from 1 to 125 points per second.
Line Feed
Enable or disable line feed.
Proximity
Enable or disable out-of-proximity data.
Margin Data
Enable or disable margin data.
BANK THREE
Resolution
Set resolution (200 to 1000 lines per inch (lpi) or 10 to 100 lines per
millimeter (lpmm).
Format
Select output format 0-31.
BANK FOUR
RS-232 Setup
Baud rate, data and stop bits and parity.