GTCO Cordless Roll-Up - Users Guide - Manual (Page 4)

Cordless Roll-Up 4
Special features include:
 Cordless transducers
 Flexible, portable tablet
 Dual tablet orientation
 GTCO, CalComp and Summagraphics emulations
What You Will Need to Use Cordless Roll-Up
 PC with an RS-232C serial communication port. (Signal levels must conform to EIA
RS2320 specifications.)
 Graphic application software that accepts digitizer input via the computer’s RS-232C
serial port.
Care and Handling of Cordless Roll-Up
The Cordless Roll-Up was designed to be both portable and durable. As with any product,
it requires proper care and handling for reliable operation. By following these
recommendations, the Cordless Roll-Up will provide you with many years of service:
 Always use the digitizer on a flat surface.
 Before moving the digitizer, disconnect the transducer and the interface cable.
 Before moving the digitizer, roll it up. The housing along the side of the tablet is
designed as a rolling aid and it allows you to easily control rolling action. (See
Transporting Cordless Roll-Up for specific moving instructions.)
 Do not permanently attach anything to the tablet.
 Do not use sharp instruments on or near the tablet, to avoid scratching or cutting it.
Cuts in the tablet will violate the warranty.
 Do not crease, dent or abuse the tablet. Creases can damage the tablet structure.
Severe creases or abuse will violate the warranty.
 Clean the tablet with any mild, nonabrasive household cleaner. Rubbing alcohol is
recommended. After cleaning, wipe the surface dry to avoid possible digitizing
errors.
Transporting Cordless Roll-Up
You MUST transport the Cordless Roll-Up with the factory-supplied shipping materials
(heavy gauge cardboard tube, insert and end caps). Failure to do so could result in serious
damage to the unit and may violate the warranty.