GTCO Summagraphics ADB Interface - Users Guide - Manual (Page 10)

Summagraphics 10
3. Attach the ADB adapter box to the computer.
The adapter box has two ports, labeled with the ADB icon:
Plug either end of the ADB cable into one of the two ports.
Plug the other end of the cable into one of the system’s ADB ports. There are two
ports on the keyboard and two ports on the computer.
4. Start the tablet.
Start the tablet as described in its installation guide.
5. Start the computer.
Turn on the computer. The light on the ADB adapter box is lit, indicating that it is
receiving power from the computer. (Although the ADB adapter box contains a
power port, it receives power from the computer directly. The tablet receives its
power from the external power supply.)
At this time, the tablet is working with your computer, but it is in mouse mode. For
it to be in tablet mode, install the tablet driver.