GTCO Summagraphics ADB Interface - Users Guide - Manual (Page 9)

Summagraphics 9
 Proximity Transmission, on “always transmit”
 Grid Diagnostics off, “no prompts to host”
 1000 lpi fixed resolution
 Binary format
 Stream Mode on
Microgrid DIP Switch Settings
1 2 3 4 5 6 7 8
DIP Switch 1 (SW1) ON OFF OFF ON ON OFF ON OFF
DIP Switch 2 (SW2) OFF ON OFF ON ON ON ON ON
2. Connect the tablet to the ADB adapter box.
The ADB kit contains a cable with a 25-pin D connector and a phone connector. Plug
the D connector into Port 1 (J4) on the Microgrid controller.
Plug the phone connector into the tablet socket on the ADB adapter box.