Heli-Max HMXJ2025 - Manual (Page 11)

11
6. Press either the MODE or ENTER button. The channel mixing selection, 1, 2 or 3 (see
selection information above), as well as the swashplate icon will fl ash.
7. Turn the ADJUST dial to adjust the value, note either a + or – value and the relationship
they have on direction. It’s also important to note that these values also dictate total
defl ection volume. The higher the value, the more travel the selection will move.
8. Press MODE or ENTER to accept the changes.
9. Press BACK to exit the menu.
GYRO GAIN
Allows for both heading hold and non-heading hold fl ight conditions.
1. Turn on your transmitter.
2. Press the MODE button for one second. You have entered model setup.
3. Turn the ADJUST dial until you see the G-S icon fl ash.
4. Push either the MODE or ENTER button to activate the selection.
5. The value will fl ash based on the G.S switch position.
6. A value of over 50% engages heading hold and a value of below
50% non-heading hold. The values also dictate gyro sensitivity. Values
closest to 0% (N-HH) and 100% (HH) represent the MOST sensitivity
and values closed to 50% (i.e. 49% (N-HH, and 51% HH) the least.
7. Use the ADJUST dial to adjust the value.
8. Press the BACK button to exit and save the settings.
THROTTLE HOLD
This feature presets a throttle position without affecting pitch.
1. Turn on your transmitter.
2. Press the MODE button for one second. You have entered model setup.
3. Turn the ADJUST dial until you see the TH icon fl ash.
4. Push either the MODE or ENTER button to activate the selection.
5. Use the ADJUST dial to adjust the value. (NOTE: On an electric powered helicopter
this will enable the motor controller, causing the motor to turn. On electric helicopters
a value of 000 is your safest option).
6. Press the BACK button to exit and save the settings.
ATS.MIX (REVOLUTION MIXING)
Only used with non-heading hold gyros.
1. Turn on your transmitter.
2. Press the MODE button for one second. You have entered model setup.
3. Turn the ADJUST dial until you see the channel numbers as well as the MIX icon fl ash
4. Press ENTER to turn on the feature.
0%
100%
100%
100%
0%
50%
25%
75%
50%
50%
H
ea
di
ng
Ho
ld
N
o
n
-H
ea
din
g H
old