Heli-Max HMXJ2025 - Manual (Page 6)

6
SYSTEM SETUP FUNCTION
MODEL MEMORY (SWITCHING BETWEEN MODELS)
You may have up to 10 models (airplane and/or helicopter) stored into your
transmitter. (Models 0 through 9).
1. Turn the transmitter on.
2. Hold both buttons MODE and BACK down for one second for system setup.
3. Press the ENTER button and the model number itself will continue to fl ash.
4. Turn the ADJUST dial either clockwise or counterclockwise to scroll between models.
5. Press ENTER to accept your selection.
6. Press BACK to escape and save the setting.
MODEL TYPE (SWITCHING BETWEEN PLANE & HELI MODE)
The TX610 allows you to have both airplane and helicopter model types setup into your
transmitter. Models 0 thought 9 could be either airplane or helicopter or a mix of both.
1. Turn the transmitter on.
2. Hold both buttons MODE and BACK down for one second for system setup.
3. Turn the ADJUST dial clockwise to enter airplane/helicopter selection mode (icon will fl ash).
4. Press button MODE or ENTER to select the mode icon itself. It will continue to fl ash.
5. Turn the ADJUST dial either clockwise or counterclockwise to scroll between airplane
or helicopter mode.
6. Press MODE or ENTER to enter your selection.
7. Press BACK to escape and save the setting.
SWASH TYPE
This is used to select between a 90° or 120° swash arrangement.
Pitch
120°
Elevator
Aileron
Electronic Mixing (CCPM )
90°
Elevator
Aileron
Mechanical Mixing
1. Turn the transmitter on.
2. Hold both buttons MODE and BACK down for one second for system setup.
3. Turn the ADJUST dial until you see the swash ring type icon, and MODE icon fl ash.
4. Press either MODE or ENTER to activate the selection.