HONDA 2004 Pilot - Owner's Manual - Manual (Page 186)

Open the tailgate.
Remove the two screws, then pull
the rear light assembly straight
back to remove it from the body.
Remove the socket of the burned
out bulb by turning it one-quarter
turn counterclockwise, and pull it
straight out of its socket.
Place a cloth on the middle edge
of a part of the lens on the
passenger’s side. Remove a part of
the lens by carefully prying on its
edge with a small flip tipped
screwdriver.
Install a new bulb into the socket
and reinstall the socket into the
light assembly.
Use a Phillips-head screwdriver to
remove the screw under the lens.
1.
1.
2.
3.
2.
4.
Lights
Maintenance
Replacing the High-mount Brake
Light Replacing Rear Bulbs
182
SCREW
Main Menu Table of Contents