HONDA 2004 Pilot - Owner's Manual - Manual (Page 188)

Pull the inner fender cover away
from the fender and bumper.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the inner fender in place.
Install the five holding clips. Lock
each clip in place by pushing on
the center.
3.
4.
5.
6.
7.
8.
Maintenance
Lights
184
Main Menu Table of Contents