Ignition switch – HONDA 2004 Pilot - Owner's Manual User Manual

Page 68

Advertising
background image

The ignition switch has four
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III).

You can insert or

remove the key only in this position.
To turn the key, the shift lever must
be in Park, and you must push the
key in slightly.

You will hear a reminder beeper if
you leave the key in the ignition
switch in the LOCK (0) or
ACCESSORY (I) position and open
the driver’s door. Remove the key to
turn off the beeper.

The shift lever must be in Park
before you can remove the key from
the ignition switch.

Use this position

only to start the engine. The switch
returns to ON (II) when you let go of
the key.

This is the normal key

position when driving. Several of the
lights on the instrument panel come
on as a test when you turn the
ignition switch from ACCESSORY
(I) to ON (II).

You can

operate the audio system and the
accessory power sockets in this
position.

If the front wheels are turned, the
anti-theft lock may make it difficult
to turn the key. Firmly turn the
steering wheel to the left or right as
you turn the key.

Ignition Switch

Instruments and Controls

LOCK (0)

START (III)

ON (II)

ACCESSORY (I)

64

Main Menu

Table of Contents

Advertising