HONDA 2004 Pilot - Owner's Manual - Manual (Page 204)

Insert the hoist bracket into the
center hole of the flat tire.
Slowly turn the wheel wrench
clockwise to take up the slack of
the hoist cable. Make sure the
bracket is seated in the center
hole of the spare tire.
Turn the wheel wrench clockwise
until the flat tire rests against the
underbody of the vehicle and you
hear the hoist click.
Store the jack in its holder. Turn
the jacks’ end bracket to lock it in
place and replace the tools and
cover.
17.
18.
19.
20.
Changing a Flat Tire
Taking Care of the Unexpected 200
NOTICE:
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.
Always raise the spare tire
hoist, even if you are not stowing a tire.
If the hoist is lef t down, it will be
damaged during driving and need to be
replaced.
Main Menu Table of Contents