HONDA 2004 Pilot - Owner's Manual - Manual (Page 187)

If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.
Use a flat-tipped screwdriver to
remove the five holding clips from
the inner fender. Pull the light assembly out of the
tailgate.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Pull the bulb straight out of its
socket. Push a new bulb into the
socket until it bottoms. Reinstall
the assembly.
1.
2.
4.
5.
3.
CONTINUED
Lights
Maintenance
Replacing a Front Side Marker
Light Bulb
183
HOLDING CLIP
Main Menu Table of Contents