HONDA 2004 Pilot - Owner's Manual - Manual (Page 40)

Push and pull the child seat
forward and from side to side to
verify that it is firmly secured. If
the child seat is not secure,
unlatch the belt, allow it to retract
fully, then repeat these steps.
To deactivate the locking
mechanism and remove a child seat,
unlatch the buckle, unroute the seat
belt, and let the belt fully retract.
After confirming that the belt is
locked, then grab the shoulder
part of the belt near the buckle
and pull up to remove any slack
from the lap part of the belt.
Remember, if the lap part of the
belt is not tight, the child seat will
not be secure.
To remove slack, it may help to put
weight on the child seat, or push on
the back of the seat while pulling up
on the belt.
4. 5.
Installing a Child Seat
Driver and Passenger Saf ety 36
Main Menu Table of Contents