HONDA 2004 Insight - Owner's Manual - Manual (Page 139)

Put a new washer on the drain bolt,
then reinstall the drain bolt.
Tighten it to:
Refill the engine with the
recommended oil.
Engine oil change capacity
(including filter):
Replace the engine oil fill cap.
Start the engine. The oil pressure
indicator should go out within 5
seconds. If it does not, turn off the
engine and check your work.
Let the engine run for several
minutes, then check the drain bolt
and oil filter for leaks.
Turn off the engine and let it sit
for several minutes, then check
the oil level on the dipstick. If
necessary, add more oil.
Install the black cover under the
engine.
6.
7.
8.
9.
10.
11.
Changing the Oil and Filter
Maintenance 136
NOTICE:
29 lbf·ft (39 N·m , 4.0 kgf·m)
2.6 US qt (2.5 )
Improper disposal of engine
oil can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly. Put it
in a sealed container, and take it to a
recycling center. Do not discard it in a
trash bin or dump it on the ground.
Main Menu Table of Contents