Wiper blades – HONDA 2004 Insight - Owner's Manual User Manual
Page 156
Advertising
Examine the new wiper blades. If
they have no plastic or metal
reinforcement along the back
edge, remove the metal
reinforcement strips from the old
wiper blade, and install them in
the slots along the edge of the new
blade.
Slide the new wiper blade into the
holder until the tabs lock.
Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
Lower the wiper arm down against
the windshield.
To replace a rear wiper blade:
Raise the wiper arm off the
windshield.
Pull one end of the blade out from
the holder.
Slide the blade out of the holder.
Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
4.
5.
6.
7.
1.
2.
3.
4.
CONTINUED
Wiper Blades
Maintenance
153
BLADE
REINFORCEMENT
Main Menu
Table of Contents
Advertising