HONDA 2004 Insight - Owner's Manual - Manual (Page 172)

CONTINUED
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Do not catch your clothes or
hands on the hooks on the rear
fender when you replace the
wheel.
To install the rear wheel skirt,
place the skirt against the body.
Line up the slots on the skirt with
the tabs in the body, then push the
skirt upward.
Make sure the wheel skirt is
installed correctly.
Tighten the two stud fasteners.
Align the
marks on the stud
fastener with the marks on the
wheel skirt.
11. 12. 13.
Changing a Flat Tire
Taking Care of the Unexpected 169
TAB
SLOT
80 lbf·ft (108 N·m , 11 kgf·m)
It is not recommended to drive your
vehicle without the wheel skirts.
It will af f ect the f uel consumption.
Main Menu Table of Contents