HONDA 2004 Insight - Owner's Manual - Manual (Page 150)

Install the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
Turn on the lights to make sure
the new bulb is working.
Put the inner fender cover in place.
Tighten the screw securely.
Open the hatch.
Pull the cover back.
Loosen the nut holding the rear
light assembly.
Remove the two covers. Remove
the two screws holding the rear
light assembly. Remove the light
assembly.
3.
2.
4. 1.
6.
7.
8.
CONTINUED
Lights
Maintenance
Replacing Rear Bulbs
147
COVER
Main Menu Table of Contents