Turn signal and headlights – HONDA 2004 Insight - Owner's Manual User Manual

Page 57

Advertising
background image

Push down on the

left lever to signal a left turn and up
to signal a right turn. To signal a lane
change, push lightly on the lever and
hold it. The lever will return to
center when you release it or
complete a turn.

Turn Signal
Off
Parking and interior lights
Headlight on
High beams
Flash high beams

Rotating the

switch on the left lever to the
‘‘

’’ position turns on the parking

lights, taillights, side-marker lights,
and rear license plate light. Turning
the switch to the ‘‘

’’ position

turns on the headlights. If you leave
the lights on with the key removed
from the ignition switch, you will
hear a reminder tone when you open
the driver’s door.

To turn on, push

the lever forward until you hear a
click. The blue high beam indicator
will come on (see page

). Pull it

back to return to low beams.

The headlights revert to normal
operation when you turn them on
with the switch.

With the headlight switch off, the
high beam headlights come on with
reduced brightness when you turn
the ignition switch to ON (II) and
release the parking brake. They
remain on until you turn the ignition
off, even if you set the parking brake.

To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.

1.
2.
3.
4.
5.
6.

44

Turn Signal

Headlights On

High Beams

(Canadian Models)

Daytime Running Lights

Turn Signal and Headlights

Instruments and Controls

54

Main Menu

Table of Contents

Advertising