Protecting your cds, cd player error messages – HONDA 2004 Insight - Owner's Manual User Manual
Page 89
Handle a CD by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the CD.
These, along with contamination
from fingerprints, liquids, and felt-tip
pens, can cause the CD to not play
properly, or possibly jam in the drive.
Error
Message
Cause
Solution
If you see an error message in the display while playing a CD, find the cause
in the following chart. If you cannot clear the error message, take your
vehicle to a Honda dealer.
FOCUS Error
Mechanical Error
High temperature
Press the EJECT button and pull out the CD.
Check if it is inserted correctly in the CD player.
Make sure the CD is not scratched or damaged.
Press the EJECT button and pull out the CD.
Check the CD for damage or deformation.
If the CD cannot be pulled out, or the error
message does not disappear after the CD is
ejected, see a Honda dealer.
Will disappear when the temperature returns to
normal.
Comf ort and Convenience Features
Protecting Your CDs, CD Player Error Messages
CD Player Error Messages
86
Main Menu
Table of Contents