HONDA 2004 Insight - Owner's Manual - Manual (Page 76)

On vehicles with automatic
transmission (CVT), see page
for
Automatic Climate Control and
Manual Operations information.
You can manually select the fan
speed by pressing the fan control
button (
/ or ). The
fan speed is shown by bars in the
display.
Turning this dial clockwise increases
the temperature of the airflow.
Switch to Recirculation mode when
driving through dusty or smoky
conditions, then return to Fresh Air
mode.
This button turns the rear window
defogger off and on (see page
).
The outside air intakes for the
heating and cooling system are at
the base of the windshield. Keep this
area clear of leaves and other debris.
If the cooling provided in ECON
mode is not adequate, press the Auto
button (see page
).
This button turns the air
conditioning on and off. When the
air conditioning is turned on with
this button, the auto idle stop works
only if the outside temperature is
above 41°F (5°C).
Press the mode control button to
select the vents the air flows from.
Some air will flow from the
dashboard corner vents in all modes.
Air flows from the center
and corner vents in the dashboard.
When the indicator in the button is
on, air from the vehicle’s interior is
recirculated throughout the system.
When the indicator is off, air is
brought in from the outside of the
vehicle (Fresh Air mode).
The system should be left in Fresh
Air mode under almost all conditions.
Keeping the system in Recirculation
mode, can cause the windows to fog
up.
When this button is pressed, the
auto idle stop works only if the
outside temperature is above 41°F
(5°C).
76
56
76
CONTINUED
On vehicles with automatic
transmission
On vehicles with manual transmission
and no A/C
Comf ort and Convenience Features
Vents, Heating, and A/C
Fan Control
Temperature Control Dial
Rear Window Def ogger Button
Recirculation Button
ECON Button
Mode Control Button
73
Main Menu Table of Contents