HONDA 2004 Insight - Owner's Manual - Manual (Page 88)

When a CD is not being played, store
it in its case to protect it from dust
and other contamination. To prevent
warpage, keep CDs out of direct
sunlight and extreme heat.
To clean a CD, use a clean soft cloth.
Wipe across the CD from the center
to the outside edge.
A new CD may be rough on the
inner and outer edges. The small
plastic pieces causing this roughness
can flake off and fall on the re-
cording surface of the CD, causing
skipping or other problems. Remove
these pieces by rubbing the inner
and outer edges with the side of a
pencil or pen.
Never try to insert foreign objects in
the CD player or the magazine.
Handle your CDs properly to
prevent damage and skipping.
Play only standard round CDs.
Odd-shaped CDs may jam in the
drive or cause other problems.
CD-RW discs will not work in this
unit.
When recording a CD-R, the
recording must be closed for it to
be used in CD players.
When using CD-R discs, use only
high quality CDs labeled for audio
use.
To select the CD changer, press the
CD button. The CD and track
numbers will be displayed. To select
a different CD, use the preset 5
(DISC
) or preset 6 (DISC )
button. If you select an empty slot in
the magazine, the changer will, after
finding that slot empty, try to load
the CD in the next slot.
CONTINUED
Comf ort and Convenience Features
Protecting CDs Protecting Your CDs
CD Changer, Protecting Your CDs
General Inf ormation
85
Main Menu Table of Contents