HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 169)

The tape direction indicator will light
to show you which side of the
cassette is playing. The
indicates
the side you inserted facing upward
is now playing. If you want to play
the other side, press the Preset 3
(PLAY/PROG) side of the preset
bar.
Dolby noise reduction turns on when
you insert a cassette. The
indi-
cator will light in the display. If the
tape was not recorded with Dolby
noise reduction, turn it off by
pressing the Preset 4 (NR) side of
the preset bar.
Noise reduction remains off until you
turn it on by pressing the button
again.
If you turn the system off while a
tape is playing, either with the PWR/
VOL knob or by turning off the
ignition, the cassette will remain in
the drive. When you turn the system
back on, the cassette player will be in
pause mode. To begin playing, press
the Preset 3 (PLAY/PROG) side of
the preset bar.
When the system reaches the end of
the tape, it will automatically reverse
direction and play the other side. If
you want to remove the cassette
from the drive, press the eject button
on the cassette player.
To switch to the radio or CD player
while a tape is playing, press the
AM/FM, or CD/AUX button. To
change back to the cassette player,
push the CD/AUX button.
Audio System
Comf ort and Convenience Features 166
Main Menu Table of Contents