HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 71)

If you leave the lights on with the
ignition switch in ACCESSORY (I)
or LOCK (0), you will hear a
reminder chime when you open the
driver’s door.
To change from low beams to high
beams, push the turn signal lever
forward until you hear a click. The
blue high beam indicator will light
(see page
). To return to low
beams, pull the turn signal lever
back.
To flash the high beams, pull the
turn signal lever back lightly, then
release it. The high beams will come
on and go off.
The high beams will stay on for as
long as you hold the lever back, no
matter what position the headlight
switch is in.
The rotating switch on the left lever
controls the lights. Turning this
switch to the ‘‘
’’ position turns
on the parking lights, taillights,
instrument panel lights, and rear
license plate lights. Turning the
switch to the ‘‘
’’ position turns
on the headlights.
62
Controls Near the Steering Wheel
Instruments and Controls
Headlights
68
Main Menu Table of Contents