HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 320)

Open the trunk.
Test the lights to make sure the
new bulb is working.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Push the new bulb straight into
the socket until it bottoms.
Pull the bulb straight out of its
socket. Determine which of the two bulbs
is burned out: stop/taillight or turn
signal.
Remove the socket by turning it
one-quarter turn counterclockwise.
Remove the light assembly cover
by pulling its outside edge.
Install the light assembly cover.
Make sure it snaps into place.
1.
3.
2. 4.
5.
6.
7.
Replacing Rear Bulbs
(in Fenders)
Lights
Maintenance 317
BULBS
COVER
SOCKETS
Main Menu Table of Contents