HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 322)

Open the trunk and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Remove the burned-out bulb by
pulling it straight out of the socket.
Install the new bulb and reinstall
the socket. Make sure the new
bulb is working.
Remove the license light assembly
by carefully prying on the left
edge of the lens with a flat-tip
screwdriver and pulling the
assembly out. Remove the lens from the bulb
holder by pulling the lens while
squeezing the tabs on both sides
of the holder. 1.
2.
3.
1. 2.
CONTINUED
Replacing a High-mount Brake
Light Bulb Replacing a Rear License Plate
Bulb
Lights
Maintenance 319
LENS
BULB BULB
SOCKET
HOLDER
LENS
Main Menu Table of Contents