HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 174)

To store a frequency:
Use the TUNE, SEEK, or SCAN
function to tune the radio to a
desired station.
Repeat steps 2 to 4 to store a total
of six stations on AM and twelve
on FM.
The preset frequencies will be lost if
your car’s battery goes dead, is
disconnected, or the radio fuse is
removed.
The SCAN function
samples all the stations with strong
signals on the selected band. To
activate it, push and release the
SCAN button on the driver’s side of
the audio display or touch the SCAN
icon at the bottom of the display.
You will see SCAN in the display.
The system will scan up the band for
a station with a strong signal. When
it finds one, it will stop and play that
station for approximately five
seconds. If you do nothing, the
system will then scan for the next
strong station and play that for five
seconds. When it plays a station that
you want to continue listening to,
press the SCAN button or touch the
SCAN icon again.
Push the AUDIO DISPLAY button
to view the audio display. You will
see the six preset icons.
Select the desired band, AM or
FM. FM1 and FM2 let you store
two frequencies with each preset
icon.
Pick the preset icon you want for
that station. Touch the icon, and
hold it until you hear a beep.
Once a station’s frequency is stored,
simply touch the proper preset icon
to tune to it.
You can store the
frequencies of your favorite radio
stations in the six preset icons. Each
icon will store one frequency on the
AM band, and two frequencies on
the FM band.
1.
2.
3.
4.
5.
CONTINUED
Audio System
Comf ort and Convenience Features
SCAN Preset
171
Main Menu Table of Contents