HONDA 2003 Accord Sedan - Owner's Manual - Manual (Page 210)

CONTINUED
To close the hood, lift it up slightly to
remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the hood to
about a foot (30 cm) above the
fender, then let it drop.
After closing the hood, make sure it
is securely latched.
Lift the hood up most of the way.
The hydraulic supports will lift it
up the rest of the way and hold it
up. Pull the support rod out of its clip
and insert the end into the hole on
the front of the hood near the
center.
To close the hood, lower it to about a
foot (30 cm) above the fender, then
press down firmly with your hands.
After closing the hood, make sure it
is securely latched.
3. 3.
6-cylinder models 4-cylinder models
Bef ore Driving
Service Station Procedures
207
SUPPORT ROD
Main Menu Table of Contents