Intellijel Metropolis - Manual (Page 2)

2
1 - AUX A input jack
Patch a -5V to +5V source here for modulating the sequencer parameter assigned to AUX A .
2 - GATE output jack
The sequencer gate signal (0V for off, 5V for on) is produced here. Typically you would patch this to
the gate input of an ADSR or AHD envelope generator.
3 - PITCH output jack
The pitch control voltage (CV) is produced here. This would usually be patched to the 1V/Oct or
PITCH/FM inputs on a VCO. This signal is in the range of 0-5V and scaled to 1V/Oct.
4 - SYNC output jack
A pulse is produced here at either the last clock pulse in a sequence or the first depending on the
CONFIG menu setting for SYNC. The yellow led indicates the output state.
5. AUX B input jack
Patch a -5V to +5V modulation signal source here for modulating the sequencer parameter assigned
to AUX B.
FRONT PANEL ELEMENTS