Intellijel Metropolis - Manual (Page 9)

9
BRN-F - FIXED BROWNIAN MODE
Same as BRN mode except that the total length of the sequence is determined by the total pulse
count set in the STAGES menu.
STAGES
Sets the length of the sequence in terms of number of STAGES or PULSES depending on the direc-
tion MODE that is currently active.
STEP/DIV
The step/div value determines how many clock pulses form a single gate if the gate mode for the
stage is REPEAT. The range of values is 1 to 4 pulses.
If STEP/DIV = 1 then the gate output goes high on every clock pulse
If STEP/DIV = 2 then the gate output goes high on every two clock pulses
If STEP/DIV = 3 then the gate output goes high on every three clock pulses
If STEP/DIV = 4 then the gate output goes high on every four clock pulses
E.g. If the PULSE COUNT for a stage was ‘5’ and the STEP/DIV was ‘2’ then the result would be
three gates produced where the first two are each 2 clock pulses long (1/8th notes) and the third
would be a single clock pulse (1/16th).
SCALE
This allows you to select one of several standard scales used to quantize the values of the PITCH
sliders. See the APPENDIX - SCALES for a full list of the available scales and their abbreviations.
ROOT
Here you can set the root note of the currently active scale. If active scale is CHROMATIC then you
changing the ROOT will have no perceivable effect.
MENU FUNCTIONS
(continued...)