Interlogix GE-DSSG-244-POE User Manual - Manual (Page 148)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
146
•
Games
Indicates the common games that apply to the specific QCE.
•
User Definition
Indicates the user definition that applies to the specific QCE. The user definitions
are:
Ethernet Type: Specify the Ethernet Type filter for this QCE. The allowed range is
0x600 to 0xFFFF.
VLAN ID: VLAN ID filter for this QCE. The allowed range is 1 to 4095.
UDP/TCP Port: Specify the TCP/UDP port filter for this QCE. The allowed range
is 0 to 65535.
DSCP: Specify the DSCP filter for this QCE. The allowed range is 0 to 63.
Buttons
: Click to cancel the wizard.
: Click to go back to the previous wizard step.
: Click to continue the wizard.
„
STEP-2
According to your selection on the previous page, this wizard will create specific QCEs (QoS Control Entries) automatically.
First select the QCL ID for these QCEs, and then select the traffic class. Different parameter options are displayed depending on the
frame type that you selected.
Figure 4-9-4 Set up Typical Network Application Rules page 2 screenshot
The page includes the following fields:
Object Description
•
QCL ID Select the QCL ID to which these QCEs apply.
•
Traffic Class Select a traffic class of Low, Normal, Medium, or High to apply to the QCE.