Interlogix GE-DSSG-244-POE User Manual - Manual (Page 324)

User’s Manual of NS3601-24P/4S Series
322
Security Network ACL Action
Description:
Set or show the ACL port default action.
Syntax:
Security Network ACL Action [<port_list>] [permit|deny] [<rate_limiter>] [<port_copy>] [<logging>] [<shutdown>]
Parameters:
<port_list> : Port list or 'all', default: All ports
permit : Permit forwarding (default)
deny : Deny forwarding
<rate_limiter> : Rate limiter number (1-15) or 'disable'
<port_copy> : Port number for copy of frames or 'disable'
<logging> : System logging of frames: log|log_disable
<shutdown> : Shut down ingress port: shut|shut_disable
Default Setting:
300
Example:
Show ACL action in port 1
SWITCH/>security network acl action 1
Port Action Rate Limiter Port Copy Logging Shutdown Counter
---- ------ ------------ --------- -------- -------- -------
1 Permit Disabled Disabled Disabled Disabled 0
Security Network ACL Policy
Description:
Set or show the ACL port policy.
Syntax:
Security Network ACL Policy [<port_list>] [<policy>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<policy> : Policy number (1-8)
Default Setting:
1
Example:
Set ACL policy 2 for port 1
SWITCH/>security network acl policy 1 2
Security Network ACL Rate
Description:
Set or show the ACL rate limiter.
Syntax:
Security Network ACL Rate [<rate_limiter_list>] [<packet_rate>]
Parameters:
<rate_limiter_list> : Rate limiter list (1-15), default: All rate limiters
<packet_rate> : Rate in pps (1, 2, 4, ..., 512, 1k, 2k, 4k, ..., 1024k)
Default Setting: