Interlogix GE-DSSG-244-POE User Manual - Manual (Page 65)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
63
and this section must include the correct platform ID and version. The global section is
optional and includes configuration which is not related to specific switch ports. The
switch section is optional and includes configuration which is related to specific switch
ports.
Module tags: <ip>, <mac>, <port> etc. These tags identify a module controlling specific parts of the
configuration.
Group tags: <port_table>, <vlan_table> etc. These tags identify a group of parameters, typically a
table.
Parameter
tags:
<mode>, <entry> etc. These tags identify parameters for the specific section, module
and group. The <entry> tag is used for table entries.
Configuration parameters are represented as attribute values. When saving the configuration from the switch, the entire
configuration including syntax descriptions is included in the file. The file may then be modified using an editor and loaded to a
switch.
The examples below shows a small configuration file only including configuration of the MAC address age time and the learning
mode per port. When loading this file, only the included parameters will be changed. This means that the age time will be set to 200
and the learn mode will be set to automatic.
„ Save Configuration
1. Press the “Save Configuration” button to save the current configuration in manager workstation. The following screens in
Figure 4-2-22 & 4-2-23 appear
Figure 4-2-22 File Download screen
2. Chose the file save path in management workstation.