Interlogix GE-DSSG-244-POE User Manual - Manual (Page 368)

User’s Manual of NS3601-24P/4S Series
366
QoS QCL Lookup
Description:
Lookup QCE.
Syntax:
QoS QCL Lookup [<qcl_id>] [<qce_id>]
Parameters:
<qcl_id> : QCL ID
<qce_id> : QCE ID (1-24)
QoS Mode
Description:
Set or show the port egress scheduler mode.
Syntax:
QoS Mode [<port_list>] [strict|weighted]
Parameters:
<port_list> : Port list or 'all', default: All ports
strict : Strict mode
weighted : Weighted mode
(default: Show QoS mode)
Default Setting:
Strict
Example:
Set weighted mode for port15
SWITCH/>qos mode 15 weighted
QoS Weight
Description:
Set or show the port egress scheduler weight.
Syntax:
QoS Weight [<port_list>] [<class>] [<weight>]
Parameters:
<port_list> : Port list or 'all', default: All ports
<class> : Traffic class low/normal/medium/high or 1/2/3/4
<weight> : Traffic class weight 1/2/4/8
QoS Rate Limiter
Description:
Set or show the port rate limiter.
Syntax:
QoS Rate Limiter [<port_list>] [enable|disable] [<bit_rate>]
Parameters:
<port_list> : Port list or 'all', default: All ports
enable : Enable rate limiter
disable : Disable rate limiter
(default: Show rate limiter mode)
<bit_rate>
: Rate in 1000 bits per second (500-1000000 kbps)
Default Setting: