Interlogix GE-DSSG-244-POE User Manual User Manual
Page 262
Advertising
IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
260
Figure 4-17-12
Stack Configuration
Step 5:
We wish to make the IFS switch with MAC “00-30-4f-7b-9c-b2” / Switch ID=2 to become the Stack Master and swap the
Switch ID to 1.
Select the switch with ID=1 and assign a new ID for this unit, for example: ID=4
Figure 4-17-13
Assing new ID for current master
Select the target switch and set up with lower priority “1”, also re-assing the Switch ID=1 for it. After click Save, click
“Start Master Election” and save again.
Advertising
This manual is related to the following products: