Interlogix GE-DSSG-244-POE User Manual - Manual (Page 283)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
281
Parameters:
<port_list> : Port list or 'all', default: All ports
<command> : The command parameter takes the following values:
clear : Clear port statistics
packets : Show packet statistics
bytes : Show byte statistics
errors : Show error statistics
discards : Show discard statistics
filtered : Show filtered statistics
low : Show low priority statistics
normal : Show normal priority statistics
medium : Show medium priority statistics
high : Show high priority statistics
(default: Show all port statistics)
up
: Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Port VeriPHY
Description:
Run cable diagnostics.
Syntax:
Port VeriPHY [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
MAC Address Table Command
MAC Configuration
Description:
Show MAC address table configuration.
Syntax:
MAC Configuration [<port_list>]
Parameters:
<port_list> : Port list or 'all', default: All ports
Example:
Show Mac address state
SWITCH/>mac configuration
MAC Configuration:
==================
MAC Address : 00-30-4f-24-04-d1
MAC Age Time: 300
Port Learning
---- --------
1 Auto
2 Auto
3 Auto
4 Auto
5 Auto
6 Auto
7 Auto