Interlogix GE-DSSG-244-POE User Manual - Manual (Page 77)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
75
Auth, NoPriv : Authentication and none privacy.
Auth, Priv : Authentication and privacy.
•
Read View Name
The name of the MIB view defining the MIB objects for which this request may
request the current values. The allowed string length is 1 to 32, and the allowed
content is the ASCII characters from 33 to 126.
• Write View Name The name of the MIB view defining the MIB objects for which this request may
potentially SET new values. The allowed string length is 1 to 32, and the allowed
content is the ASCII characters from 33 to 126.
Buttons
: Click to add a new access entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
Port Management
Use the Port Menu to display or configure the Managed Switch's ports. This section has the following items:
„ Port Configuration Configures port connection settings
„ Port Statistics Overview
„ Port Statistics Detail
Lists Ethernet and RMON port statistics
„ SFP Module Information Display SFP information
„ Port Mirror Sets the source and target ports for mirroring
Port Configuration
This page displays current port configurations. Ports can also be configured here. The port settings relate to the currently selected
stack unit, as reflected by the page header. The table has one row for each port on the selected switch in the stack and a number of
columns, which are:
The Port Configuration screen is shown
Figure 4-4-1 .