Interlogix GE-DSSG-244-POE User Manual - Manual (Page 168)

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual
166
„ ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object Description
•
ARP/RARP Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
ARP : Frame must have ARP/RARP opcode set to ARP.
RARP : Frame must have ARP/RARP opcode set to RARP.
Other : Frame has unknown ARP/RARP Opcode flag.
•
Request/Reply
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any
: No ARP/RARP OP flag is specified. (OP is "don't-care".)
Request : Frame must have ARP Request or RARP Request OP flag set.
Reply : Frame must have ARP Reply or RARP Reply OP flag.
•
Sender IP Filter
Specify the sender IP filter for this ACE.
Any
: No sender IP filter is specified. (Sender IP filter is "don't-care".)
Host : Sender IP filter is set to Host. Specify the sender IP address in the SIP
Address field that.
Network
: Sender IP filter is set to Network. Specify the sender IP address and
sender IP mask in the SIP Address and SIP Mask fields that appear.
•
Sender IP Address
When "Host" or "Network" is selected for the sender IP filter, you can enter a
specific sender IP address in dotted decimal notation.
•
Sender IP Mask When "Network" is selected for the sender IP filter, you can enter a specific
sender IP mask in dotted decimal notation.
• Target IP Filter Specify the target IP filter for this specific ACE.
Any
: No target IP filter is specified. (Target IP filter is "don't-care".)
Host
: Target IP filter is set to Host. Specify the target IP address in the Target IP
Address field that.
Network
: Target IP filter is set to Network. Specify the target IP address and
target IP mask in the Target IP Address and Target IP Mask fields that appear.
• Target IP Address When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.
• Target IP Mask When "Network" is selected for the target IP filter, you can enter a specific target
IP mask in dotted decimal notation.
• ARP SMAC Match Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.
0
: ARP frames where SHA is not equal to the SMAC address.
1 : ARP frames where SHA is equal to the SMAC address.
Any
: Any value is allowed ("don't-care").
• RARP SMAC Match Specify whether frames can hit the action according to their target hardware
address field (THA) settings.
0
: RARP frames where THA is not equal to the SMAC address.
1
: RARP frames where THA is equal to the SMAC address.
Any
: Any value is allowed ("don't-care").
• IP/Ethernet Length Specify whether frames can hit the action according to their ARP/RARP
hardware address length (HLN) and protocol address length (PLN) settings.
0
: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is
equal to IPv4 (0x04) must not match this entry.
1
: ARP/RARP frames where the HLN is equal to Ethernet (0x06) and the (PLN) is
equal to IPv4 (0x04) must match this entry.
Any
: Any value is allowed ("don't-care").
• IP Specify whether frames can hit the action according to their ARP/RARP
hardware address space (HRD) settings.
0
: ARP/RARP frames where the HLD is equal to Ethernet (1) must not match this
entry.
1
: ARP/RARP frames where the HLD is equal to Ethernet (1) must match this
entry.
Any
: Any value is allowed ("don't-care").
• Ethernet Specify whether frames can hit the action according to their ARP/RARP protocol
address space (PRO) settings.
0
: ARP/RARP frames where the PRO is equal to IP (0x800) must not match this
entry.