Interlogix GE-DSSG-244-POE User Manual User Manual

Page 95

Advertising
background image

IFS NS3601-24P/4S GE-DSSG-244 and 244-POE User Manual

93

VLAN allow a network to be segmented in order to reduce the size of broadcast domains. All packets entering a VLAN will only be
forwarded to the stations (over IEEE 802.1Q enabled switches) that are members of that VLAN, and this includes broadcast,
multicast and unicast packets from unknown sources.

VLAN can also provide a level of security to your network. IEEE 802.1Q VLAN will only deliver packets between stations that are
members of the VLAN. Any port can be configured as either tagging or untagging.:

„

The untagging feature of IEEE 802.1Q VLAN allows VLAN to work with legacy switches that don't recognize VLAN tags in

packet headers.

„

The tagging feature allows VLAN to span multiple 802.1Q-compliant switches through a single physical connection and

allows Spanning Tree to be enabled on all ports and work normally.

Some relevant terms:
-

Tagging

- The act of putting 802.1Q VLAN information into the header of a packet.

-

Untagging

- The act of stripping 802.1Q VLAN information out of the packet header.

802.1Q VLAN Tags

The figure below shows the 802.1Q VLAN tag. There are four additional octets inserted after the source MAC address. Their
presence is indicated by a value of 0x8100 in the Ether Type field. When a packet's Ether Type field is equal to 0x8100, the packet
carries the IEEE 802.1Q/802.1p tag. The tag is contained in the following two octets and consists of 3 bits of user priority, 1 bit of
Canonical Format Identifier (CFI - used for encapsulating Token Ring packets so they can be carried across Ethernet backbones),
and 12 bits of VLAN ID (VID). The 3 bits of user priority are used by 802.1p. The VID is the VLAN identifier and is used by the
802.1Q standard. Because the VID is 12 bits long, 4094 unique VLAN can be identified.

The tag is inserted into the packet header making the entire packet longer by 4 octets. All of the information originally contained in
the packet is retained.


802.1Q Tag

Advertising
This manual is related to the following products: