Philips 27ce7695 - Manual (Page 14)

Freezing the PIP picture
• Press the FREEZE button.
The PIP picture is still.
• Press the FREEZE button again to
cancel the still PIP picture.
Note: The still picture will also be
cancelled when another PIP source is
selected or when the SWOP button is
pressed.
Still picture in TV mode
When watching TV, you can freeze any
TV picture as PIP picture (PIP is not
switched on here).
• Press the FREEZE button.
PIP is now switched on and the same
TV picture appears as a still PIP picture.
• The still PIP picture can be cancelled
by pressing the FREEZE button again.
Using the video recorder with
PIP
• Use the SELECT button to select the
video recorder as the PIP source.
a. Select the desired TV station in the
PIP picture using the programme
selection buttons on the remote control
unit (remote control in VCR mode) or
direct on the video recorder.
b. You can also watch a video tape in
the PIP picture by putting the video
recorder in play mode.
Switching off with the remote
control unit (STANDBY)
• Press the STANDBY button.
The (1) indication on the monitor lights
up.
You can switch the monitor on again by
pressing the CONNECT Q* button, if
the remote control is in the TV, VCR,
EXT.1 or EXT.2 mode. The A/V tuner
amplifier remains switched on.
If the remote control is in the A-TU
mode when the STANDBY button is
pressed, the indication (]) will light up
on the A/V tuner amplifier and on the
monitor.
You can switch the A/V tuner amplifier
and the monitor on again by selecting
the function TV, VCR, EXT.1 or EXT.2
and then pressing the CONNECT
button.
Operating the monitor and
the A/V tuner amplifier
without remote control unit
It is possible to operate the most
important monitor functions without
using the remote control unit.
VIDEO source selector with TUNER,
VCR, EXT.1 and EXT.2 buttons on the
A/V tuner amplifier.
UP/DOWN for programme number
selection (TV) and VOLUME for sound.
10