Philips 27ce7695 - Manual (Page 25)

General
What to do when there are faults
• if the combined unit does not
operate as desired, check that there is
mains voitage, that the antenna is
connected and that aii switches are in
the right positions.
• If there is no sound, check if the
MUTE button is depressed.
• if no Doiby Surround Processor has
been connected, the ‘surround sound’
switch on the A/V tuner ampiifier
should be in position OFF.
• Is the VIDEO RGB/RGB switch in the
right position?
• Is the CONNECTIONS
(FRONT/REAR) switch in the right
position?
• If there is a sharp white stripe on the
TV screen, if the letter ‘F’ with a digit
appears on the display of the A/V tuner
amplifier or if the indication flashes
although you are not operating the
combined unit, you should switch off
the TV and consult your dealer.
Cleaning the combined unit
If necessary, you can clean the unit
with a damp chamois-leather cloth. Do
not use abrasive cleaning agents.
Technical information
MODE
VIDEO CP
O o
c
T DOWN UP i
y
Radio frequency selection
• Press the AUDIO F/P button.
A radio frequency appears on the
display.
• Press the T DOWN or UP ▲ button
to select the desired frequency of the
radio station.
u
MODE SYSTE».!
o
AUDIO F/P VIDEO
U
e T DOWN UP i
TV channel selection
• Press the VIDEO C/P button.
The TV.C indication and a channel
number will appear on the display.
• Press the T DOWN or UP A button
to select the desired TV station.
Note: You will find a list of channel
numbers and their indication under the
section ‘Channel number indicatons on
the screen’.
Specifications of the Euroconnectors, Monitor
and A/V tuner amplifier
A = Monitor input lOI (on the monitor)
B = Monitor input OI
C = External 1C3*
D = External 2 Q*
E = VCR
<a
P i n
1 audio output (right channel)
2 audio input (right channel)
3 audio output (left channel)
4 earth terminal audio
5 earth terminal B input
6 audio input (left channel)
7 B input
8 remote control signals
+ status input (EXT 1)
9 earth terminal G input
10 not connected
11 G input
12 not connected
13 earth terminal R input
14 not connected
15 R input
16 fast blanking input
17 earth terminal CVBS
18 earth terminal fast blanking
19 CVBS output
20 CVBS input
21 screening
A B C D
0.5Vrms/1kohm
0.5Vrms/10kohm
0.5Vrms/1kohm
0.5Vrms/10kohm
0.7Vpp/75ohm
0-2/10-12V/10kohm x x x
XXX
0.7Vpp/75ohm XXX
0.7Vpp/75ohm x
0-0.4V/1-3V/75ohm x
X
X
1 Vpp/75 ohm
1 Vpp/75 ohm
21