Philips 27ce7695 - Manual (Page 16)

B
TV
o
Operating Teletext in
combination with the remote
control unit
Switching on if necessary.
• Press the POWER button of the
monitor.
• Press the POWER button of the A/V
tuner amplifier.
• Press the TV button.
The TV indication appears on the
display of the remote control unit.
w
TELETEXT
• Press the TELETEXT button.
Page number 100 (usually the table of
contents) appears on the screen.
Page selection
The page number always consists of
three digits (e.g. 120).
Note 1: There are no page numbers
beginning with a 0 or a 9. if a 0 or 9 is
selected as the first digit, this selection
error is indicated by P-.. on the
information line.
Note 2: If you have pressed the wrong
digit button, you must first complete a
combination of three digits and then
select the right page number.
A. Direct page selection
Page selection:
• Select the desired page with the digit
buttons on the remote control unit.
The selected page number is now
shown in green on the information line.
As soon as the selected page number
has been located, this page number is
shown in white.
(If the selected page number remains
green, this means that the selected
page number is not being transmitted
at that moment.)
Calling up the page:
• Press the •$* (NEXT) button.
If you do not select a new page
number, the next page number is
automatically sought.
• Press the <$• (NEXT) button again
when you want this page to be shown
on the screen.
B. Page selection of
temporarily stored page
numbers
An index page lists a number of
columns, each of which has a page
number. A selection of the page
numbers can be stored temporarily in
the memory.
The selected page numbers can only
be called up once in the stored
m
ENTER
b. Press the -$> (ENTER) button.
Repeat these operations to store the
other page numbers.
Calling up pages:
• Press the (NEXT) button.
Note: If a selected page is shown in
red, no new page numbers can be
stored as the memory is full.
12