Philips 27ce7695 - Manual (Page 24)

EI
VIDEO
RGB
Using the monitor as a
screen without the A/V tuner
amplifier
The monitor can also be used directly
for playing back equipment (sources)
such as a video recorder, CD Video
Player and Satellite Tuner.
These sources can be connected to
the Euroconnector and/or Cinch
terminals.
If you connect a source with RGB
signals (e.g. Satellite Tuner) to the
monitor, the RGB indication will light up
on the monitor.
Note: If a connected source transmits
TV antenna signals, you can also watch
Teletext.
MONITOR SOUND
• Open the flap by pressing the lug in
the bottom right-hand corner.
EJ
LEFT RIGHT
0
V
BALANCE MONO
1. Euroconnector on the back of the
monitor
If a unit connected to the
Euroconnector supplies RGB signals
without switch-over signals, the VIDEO
RGB/RGB switch should be in position
RGB.
• Put the CONNECTIONS switch in the
REAR position.
Monitor function via PIP
A source connected to the PIP input of
the monitor (e.g. Camera) can be
entered in the PIP picture with the PIP
on/off button on the remote control
unit.
2. Cinch terminals on the front of the
monitor
The VIDEO terminal is a CVBS input.
The AUDIO L and R inputs are for the
sound of a unit connected to the VIDEO
input.
• Put the CONNECTIONS switch in
FRONT position.
Operating facilities
Personal setting and changing of
picture and sound
Note: The monitor must not be in
Teletext mode.
• Open the control panel by pressing
the top right-hand corner.
• Make the desired change.
BF
PERSONAL PREFERENCE
• PFGSS tllG STORE EX ^ (C) bUttOP.
STORE I STORE EX
o Ö I Ö o
E [ I I S
SET AUDIO AND VIDEO CONTROLS
The changes are now stored in the
memory.
El
MONITOR SOUND
LEFT RIGHT
0
V
BALANCE MONO
Sound
MONO
If the sound is reproduced in stereo,
you can, if desired, switch back to
MONO.
• Press the MONO button.
The MONO indication lights up.
Balance
You can adjust balance with the LEFT
and RIGHT buttons.
Volume
You can adjust the volume of the
monitor with the A and V VOLUME
buttons.
If external loudspeakers are
connected, you can switch off the
internal loudspeakers with the
VOLUME ON/OFF button,
STEREO
During stereo transmissions, the
STEREO indication appears on the TV
screen.
20