Philips 27ce7695 - Manual (Page 18)

Note: The page number indicated by
the coioured bar and the foiiowing
pages will shift downwards one
position. The page number to be
added goes to the line which is
indicated by the coloured bar.
c. Select the desired prgramme
number (always two digits, e.g. 01).
d. Select the desired page number.
e. Press the (ENTER) button.
Bl
PERSC^ PREFEI^CE
STORE 1 STORE EX
0© lo^
E] di ID
ca AUDSO Aj;0 VIDEO CONTROLS
If necessary, repeat operations b, c, d
and e to add more page numbers.
f. Press the STORE EX O (C) button on
the TV.
Other Teletext functions
Double height
• Press the (ENLARGE) button for
double height of the top half of the
page.
• Press the -i- (ENLARGE) button
again for double height of the bottom
half of the page.
• Press the -4- (ENLARGE) button
again for normal height.
When a page is shown in double
height, the (ENLARGE) symbol
appears on the information line.
Cancelling Teletext
• Press the X (CANCEL) button.
The monitor stays in Teletext mode,
showing the tuned station on the
screen. As soon as the desired page
has been located, the page number
appears in the top left-hand corner of
the screen.
• Return to Teletext by pressing the X
(CANCEL) button again.
I£j HOLD
©
Stop rotating pages
If a page contains more text than a
Teletext page permits, rotating pages
are often used within the same page
number.
• Press the ^ (HOLD) button.
The 1^1 (HOLD) symbol appears on the
information lines and the page stops
(stop).
• Cancel stop by pressing the
(HOLD) button again.
Time code/subcode
The Teletext producers may decide to
add a time code or subcode to page
numbers.
This makes it possible:
a. to call up a page at a desired time
(time code), or
b. to select directly one of the rotating
id SUBCODE
• Press the 9 (SUBCODE) button.
• Select the desired time (e.g. 13:19
hours).
On the information line there now
appears e.g. P12391319.
b.Subcode
• Select the desired page number (e.g.
123).
• Press the 9 (SUBCODE) button.
• Select the desired subcode (e.g. 3).
On the information line there now
appears PI2393.
Note: The selected page, followed by
time code or subcode, can be:
a. called up directly by pressing the <$*
(NEXT) button, or
b. stored in the temporary memory by
pressing the ■$’ (ENTER) button.
Hidden information
Depending on the page content, hidden
information can be called up.
• Press the ? (REVEAL) button.
The ? (REVEAL) symbol appears on
the information line and the hidden
information appears on the screen.
• Press the ? (REVEAL) button again.
The information disappears.
14