Introduction, Installation, Connection – Philips 27ce7695 User Manual

Page 6: Ii ii

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Introduction

In these operating instructions you will

find all the functions and facilities of the

monitor, audio/video tuner amplifier

and remote control.

The remote control is multifunctional

and is for use with suitable Philips
audio/video equipment.

The monitor has a facility for displaying

information on the screen, known as
On Screen Display (OSD).

For optimum sound reproduction it is
advisable to use the specially designed
loudspeaker boxes.

The easiest way of learning to use the

monitor, A/V tuner amplifier and remote
control is to carry out the operations
described below in the order indicated.

Important

The drawings which accompany these

instructions each have a number, e.g.

n. These numbers refer to the same

numbers on the fold-out page. This
makes it easier for you to find the
corresponding buttons on the monitor,

A/V tuner amplifier and remote controi.

Installation

When installing the units, leave at least

3 cm free around the monitor and 5 cm

free around the A/V tuner ampiifier for
ventilation.

Do not place the monitor and A/V tuner
amplifier on a soft surface.

The monitor and A/V tuner amplifier are

suitable for a mains voltage of 220 V. If

your mains voltage is different, consult
your dealer.

El

II II

MONITOR INPUT

Connection

A/V tuner amplifier

• Connect the mains lead to the

MAINS IN terminal (press well home).

Monitor

• Insert the plug of the monitor and the

A/V tuner amplifier in the wall socket.

Radio antenna (FM)

Connect the antenna cable to the A/V

tuner amplifier.

Use a shieided antenna cable (COAX)

for FM radio reception and connect it to
the 75 Q. FM input.

Radio antenna (AM)

Use the AM pin terminal for AM radio
reception.

If you use your ‘own’ antenna, it should

be positioned at a distance of at least 2
metres from the audio/video tuner
amplifier.

• Connect TV antenna to input nr

(75 Q.) on the A/V tuner amplifier.

• Connect the monitor, using the

Eurocabie supplied, to the A/V tuner
amplifier or terminal
MONITCR INPUT OI (monitor) and

MCNITCR INPUT DI (A/V tuner

amplifier).

Advertising