Juniper Systems Allegro MX User Guide - Manual (Page 52)

52
Field PC Owner’s Manual
4. The name of the Bluetooth device appears. Tap the name,
then tap Next.
5. If the Bluetooth device has an assigned passkey, enter the
number. If the device has not already been assigned a
passkey but requires one, enter an alphanumeric passkey
on the Field PC between 1 and 16 characters. Tap Next.
Note: If you are unsure whether your device requires a passkey and
whether one has already been assigned to your Bluetooth device, see
the user documentation that came with the Bluetooth device.
Important: If the Bluetooth
device does not use a passkey,
leave the passkey blank and tap
Next. A message appears, asking
if you want to add the device to
the device list. Choose No and
skip to step 7.
Note: It is important to choose No when you are asked whether you
want to add to the device to the device list; choosing Yes sends you
back to the passkey screen.