Juniper Systems Allegro CX and CE Bluetooth CF Card - Manual (Page 14)

14 Bluetooth Card Installation Instructions
Example of a passkey: The Socket GPS receiver sold by Socket
Communications has the factory set passkey of 0183. Through the
bonding process, this receiver is uniquely bonded to the Bluetooth
enabled computer.
After entering the correct Passkey, tap on the Reply button to advance
to the screen on the Allegro indicating the device is successfully
bonded.
Properties
The Properties option displays the Bluetooth properties on your
Allegro. To access the Properties screen from the Device Manager,
complete the following steps:
Tap on the device you want to view the properties of, so the icon
is highlighted.
Tap on Device | Properties.
Properties – General
The General tab displays the following screen and properties:
Icon Selection ->
Device name
The friendly name of the remote device.
1)
2)