Juniper Systems Archer User Manual - Manual (Page 11)

To create a name, follow these steps:
1. Tap
Start > Settings.
2. From the System tab, tap About. The About window
appears.
3. Select the Device ID tab at the bottom of the screen.
4. Type in a device name. An example of a device name
appears below.
Your Field PC is now fi eld ready. If you have Windows ®
2000 or Windows ® XP, follow the next steps to install
ActiveSync, which allows you to install programs onto
your device using a desktop computer.
Note to Microsoft Windows ® Vista ® users: You have
basic fi le synchronization capability with your desktop
computer without installing any additional software.
To access these basic sync options, connect the Field
PC to the desktop computer using a USB cable. For full
Chapter 2: Getting Started
11