Juniper Systems GNSS-RTK-628 - Manual (Page 12)

12 628 GNSS RTK Expansion Pack
It is best to get this information (APN, username, and
password) directly from your wireless provider when
you subscribe and enter it manually as outlined in
the next step.
5. If the only selection in the list is “Other” you must
obtain that information (APN, user name, and
password) from the wireless provider and manually
enter this information.
Select “Other” on the list and then tap on the
Configure button at the bottom of the screen. The
following screen is shown. Enter the information into
each field specified and then tap OK. The handheld
performs a reset to configure the modem.
Note: Some wireless provider settings only specify the
APN, and the username and password are blank. If so,
enter the APN and leave the username, password fields
blank and then tap OK.