Juniper Systems TK6000 Cell Modem - Manual (Page 7)

Cell Modem Expansion Pack

4.
Tap the Cellular Network: drop down box and select
your cellular network. The appropriate Access Point
Name, user name and password will be displayed.
If there is more than one entry for your carrier, go
through the list to find the that one works. It is best
to get this information directly from the carrier when
you subscribe. This information occasionally changes.
6.
If the cellular provider cannot be found in the list,
the user must obtain that information (Access Point
Name, User name, and password) from the cellular
provider. Enter that information manually into the
appropriate boxes.
7.
The cellular provider may require the IMEI number
from the modem. This is indicated on this screen.
8.
Tap Configure to configure the modem and the
handheld.
The expansion pod modem will not be available until
the handheld is reset.