Juniper Systems Classic GG - Manual

FRS Main Menu
1. Collect
2. Maps
3. Setup
4. Diagnostics
Collect
1. Spatial
2. Form
3. List
4. Navigation
5. Map Traits
6. Map Identifiers
Maps
1. Add
2. Edit
3. Delete
4. View
Setup
1. System
2. Traits
Management
3. Database Tools
4. Hardware Setup
Diagnostics
1. Load Cells
2. Moisture
3. Level Detect
Sensor
4. Actuators
5. Version
Information
6. Print Calibrations
System
1. Manage Devices
2. Define Standard Units
3. Define Backup Location
4. Label Printer
5. Preferences
6. About
Traits Management
1. Master Traits List
2. Trait Template
Database Tools
1. Export data to CSV
2. Import data from CSV
Hardware Setup
1. Weight Calibration
a. Edit Weight Calibration
b. Slope and Motion
2. Moisture Sensor
a. Moisture Curve
3. Chamber Volume
4. Level Sensor
5. Timers
6. Actuators
7. Setup File
8. GPS Setup
Harvest Setup
1. Select desired Activity – Harvest Plot or
Harvest Strip.
2. Select desired Field Map.
3. Select desired harvest Trait Template.
4. Select Collect.
5. Select desired Moisture Curve.
6. Select Form or Nav.
7. Select Navigation Type – Serpentine, Sequential, Circular, or Random.
8. Select the Left Range and Left Row (starting plot).
401 402 403 404 401 402 403 404 401 402 403 404
301 302 303 304 301 302 303 304 301 302 303 304
201 202 203 204 201 202 203 204 201 202 203 204
101 102 103 104 101 102 103 104 101 102 103 104
Serpentine Sequential Circular
Classic GrainGage Calibrating Guide
Load Cells—Calibration
1. Select Setup>System>Define Standards Units. Select English or Metric and number of decimal places.
2. Select Setup>Hardware Setup>Classic GrainGage Setup>Edit Weight Calibration
Slope and Motion Sensor needs to be turned OFF during calibration.
3. Record Weight Calibration Coefficient value.
4. In diagnostics from the main screen, select Load Cell and Tare weight.
5. Place known weight on weigh pan and verify weight reading being displayed.
6. Adjust the weight calibration using the following equation:
New Weight Cal Coefficient =Actual Weight / Measured Weight * Current Coefficient
7. Replace the current Weight Calibration Coefficient with the calculated value. Press Save (F4).
Classic GrainGage
Quick Reference
Sheet
9. Select the primary and secondary Direction of Travel.
10. Select Save.
11. Select Form.
12. Start harvesting.